0001/ND - Rev 0 - 22 June 2013 - General Guidelines for Marine Projects
These guidelines present material that is common to more than one of the other Noble Denton guidelines for the approval of marine projects and was previously duplicated.
0009/ND Rev 7 - 22 June 2013 - Guidelines for Elevated Operations of Jack-Ups
These guidelines will be used by Noble Denton for the assessment of self-elevating platforms in the elevated condition. They address:
0013/ND Rev 7 - 22 June 2013 - Guidelines for Load-Outs
These guidelines have been developed for the loadout of items including offshore jackets, SPAR sections, modules, bridges and components from the shore onto floating or grounded barges and ships.
0015/ND Rev 4 - 22 June 2013 - Concrete Offshore Gravity Structure Construction and Installation
These guidelines have been developed for the marine aspects of construction, towage and installation of offshore concrete Gravity Base Structures (GBS) with a deck. They are intended to be applicable to deep draft structures, where much of the construction work is carried out afloat, as well as shallower draft structures where the construction of the GBS can be essentially completed in dry dock.
0016/ND Rev 7 - 22 June 2013 - Seabed and Sub-seabed Data for Approvals of Mobile Offshore Units
These guidelines describe the seabed and sub-seabed data required by Noble Denton to assess the suitability of locations for independent leg and mat-supported jack-up units, other mobile units operating on the seabed, and anchor installation and performance assessments for floating units.
0021/ND Rev 9 - 22 June 2013 - Guidelines for the Approval of Towing Vessels
These Guidelines are intended to lead to an approval by Noble Denton for entry into the Towing Vessel Approvability Scheme. They also provide guidance for the approval of towing vessels for a specific tow and bollard pull tests. They do not cover the towage of specific vessels or barges, guidance for which may be found in 0030/ND.
0027/ND Rev 10 - 22 June 2013 - Guidelines for Marine Lifting & Lowering Operations
These guidelines have been developed for the design and approval of marine lifting operations, including subsea installations (but excluding pipelines and flowlines).
0028/ND Rev 5 - 22 June 2013 - Guidelines for the Transportation and Installation of Steel Jackets
These guidelines have been developed for the design and approval of the transportation and installation of steel offshore jacket structures.
0029/ND Rev 0 - 22 June 2013 - Guidelines for Submarine Pipeline Installation
This document sets out the Guidelines on which Noble Denton approval of pipeline installation by laying, pulling or towing, would be based.
0030/ND Rev 5 - 22 June 2013 - Guidelines for Marine Transportations
These guidelines will be used by Noble Denton for approval of specialised marine transportations, including:
0031/ND Rev 1 - 22 June 2013 - Guidelines for Float-over Operations Installations/Removals
These guidelines have been developed for the float-over installation or removal of structures onto or from a host structure which may be:
0032/ND Rev 1 - 22 June 2013 - Guidelines for Moorings
These guidelines will be used by Noble Denton for the approval of moorings, including:
0035/ND Rev 0 - 22 June 2013 - Guidelines for Offshore Wind Farm Infrastructure Installation
These guidelines have been developed for the installation of offshore wind farms of various types. They mainly refer to other Noble Denton guidelines developed for similar operations, but giving alternatives which may apply to offshore wind farm installations.